Dive Mode; Dive - Standby; Dive Mode (During The Dive) - Seac DRIVER User Manual

DIVE MODE

DIVE - STANDBY

• The following information is displayed: temperature on the upper right, Dive
Time in the center (0:00), and depth at the bottom (0:0).
• After 2 seconds the display switches to the next screen, where on the upper
left it will display the number of dives in the current session.

DIVE MODE (DURING THE DIVE)

DIVE PERIOD screen
curent ascend/descend
speed (m/sec or feet/sec)
descend
dive time
current depth
The session can be launched in the following ways:
1. Manually, by pressing the "U" button for 2 seconds from the DIVE screen.
2. Automatically, by descending to a depth of at least 1.5 meters. Whatever
function the Driver is in, it will automatically switch to the Dive function.
12
DIVE STANDBY mode
DIVE title screen *2
temperature (°C)
dive time
current depth
DIVE mode
temperature (°C)
DIVE STANDBY screen
number of dives in
session
Dive session can be started either
a) Manually by [U] at standby
b) Dive 1.5m below water
Dive session is ended
a) hold [U] end the session during
surface time mode *3
b) Automatically 1 hour on surface