Parameters - Descriptions And Programming; Measurement Configuration - Echotrek SG-300 Series Installation And Programming Manual

6. PARAMETERS – DESCRIPTIONS AND PROGRAMMING

6.1 Measurement Configuration

P00: - cba Application/Engineering Units
Programming of this parameter will result in loading the factory default with the corresponding engineering units.
a
0
b
0
1
c
0
1
FACTORY DEFAULT: 000
SE/SG-300 series two-wire compact ultrasonic level transmitters
Operating (measurement) mode
Liquid level measurement
Engineering units
(according to "c")
US
Metric
m ft
cm inch
Calculation system
Metric
US
Attention: mind the sequence!
When programming this parameter the
right value "a" will be blinking first.
21