Dispensing Water - Kenmore KM5K Use & Care Manual

Using Your Water Optimizer
Be sure to complete all of the applicable instructions in the Installation Guide,
included with your Optimizer prior to using the appliance.
Powering On/Off Your Optimizer
Be sure to never plug in your Optimizer, or power on either temperature mode
before you've connected a proper water source, and enabled water flow.
1. To power on your Water Optimizer, simply plug in
electrical outlet. To power off, unplug the appliance.
2. To power on the
left) up, into the on position. To power off, flip back down.
3. To power on the
into the on position. To power off, flip back down.

Dispensing Water

1. To dispense cold water. simply press the dark blue
cup or container has reached the desired fill.
2. To dispense cold water. simply press the Light blue
your cup or container has reached the desired fill.
3. To dispense hot water, slide the red
holding it in this position with your thumb or finger, press the
your cup or container has reached the desired fill.
Using Your Water Optimizer 8
cooling system, flip the green
heating system, flip the red
U
S
Cold Mode Power Switch
T
Hot Mode Power Switch
D
C
A
Child Safety Switch
110v Power Cord
Cold Mode Button
Ambient Mode Button
to the left, then while
B
Hot Mode Button
into a 110 volt
(on the
(right) up,
until your
until
until