Advertisement
1. Areas of application
The meter is used for stationary measurements of relative humidity and temperature and indicates the
values directly in a large display. The measurement values can also be read out from a distance of up to
50 m.
2. Safety notes
To ensure safe operation of the meter, please mind the following safety instructions.
Attention
Strong mechanical stress such as e. g. pressure or vibration must be avoided.
The device must be operated at a maximum voltage of 230 V AC.
Clean the device only with a dry cloth or, if the contamination is severe, with a damp cloth. Do not
use any cleaning agents containing solvents or abrasives. Make sure that no moisture enters the
device.
Do not place the meter in a way that the front case faces an object to avoid scratches.
Warning
If you have any doubts regarding the functionality, safety or connection, contact a specialist or
our technical staff.
Do not use the device if it shows visible damage, e. g. on the case or on the operating elements
or connection cables or if the device does not work properly. If there is any doubt, have the
device checked by a specialist or by our technical staff.
Keep the device as well as all packaging materials away from children.
Do not make any technical changes to the device.
Do not use the device around explosive gases, steam, vapour or dust.
Do not use the device if parts of the device have been removed.
3. Quick guide
Remove the front cover of the device and attach the lower part of the device to the desired
place, using four screws, fixed through the four orifices in the corners.
Re-attach the front cover.
Fix the temperature / humidity sensor.
Connect the sensor cables (cable 1 = connector 1 and cable 2 = connector 2) to the device.
Connect the connection cable to a 230 V socket.
BETRIEBSANLEITUNG
3
Advertisement
