Operating Instructions For The Vacuum Kit R-Vac - Robot Coupe R 23 Manual

Keep an eye on
the position of
the O-ring seal
when fitting
part N° 1
1
Filter N° 2
can be
cleaned.
4
5
I M P O R T A N T
It is important to clean up the filter
regularly in order to maintain the original
state of the part.
24

OPERATING INSTRUCTIONS FOR THE VACUUM KIT R-VAC

1° ASSEMBLING THE VACUUM
B
KIT R-VAC
®
- Insert filter N° 2 into body N° 3
- Screw part N° 1 onto body
N° 3 (the tube is fed through
body N° 3).
2° POSITIONNING THE VACUUM
KIT R-VAC ®
A
- Insert the plastic part N°4 in the
2
lid N°6.
- Insert the vaccum kit R-VAC
into the plastic part N°4.
(Beware of the 2 seals)
- Screw part N°5 onto part N°1.
3
3° USING THE VACUUM
KIT R-VAC ®
- Connect up the vacuum pump to
valve A, check that the latter is
open (lever in shaft of connector).
- Shut valve B
(perpendicular lever).
®
4
5
7
8
®
4° ASSEMBLING THE KIT INTO THE
BOWL
- Insert the star support N°7 into the
bowl n°8.
- Insert the vaccum kit R-VAC
1
the plastic part N°4.
- Screw part N°5 onto part N°1.
6
5° ADDING LIQUID TO
THE MIXTURE
- Attach a tube to valve B.
- Immerse the other end of this
tube in the liquid to be added.
- Open valve B slowly; once the
liquid has been added,
shut valve B.
If you already have a vacuum packing
machine, you can connect the kit to
the vacuum pump on this machine.
The R-VAC ® kit was specifically
designed so that liquids can be added
to the mixture during processing,
whilst keeping the food under
vacuum.
into
®