Introduction To Your New; Robot-Coupe Power Mixer; Operating The Power Mixer; Operation - Robot Coupe MP 350 Turbo V.V. Operating Instructions Manual

Hide thumbs Also See for MP 350 Turbo V.V.:
Table of Contents

Advertisement

Available languages

Available languages

INTRODUCTION TO YOUR NEW

ROBOT-COUPE POWER MIXER

Robot-Coupe has developed a complete line of
power mixers. The features of each are described in
the table below.
Variable
Models
Speed
attachment
MP 350 Turbo
MP 350 Turbo V.V.
MP 450 Turbo
MP 450 Turbo V.V.
MP 550 Turbo
MP 600 Turbo
MP 800 Turbo
MP 350 Turbo Combi
MP 450 Turbo Combi
MP 450 Turbo FW
MP 450 Turbo FW XL
The Robot-Coupe Power Mixers perform a host of
culinary feats. The mixer attachment will allow you
to make soups, vegetable purees and pulps while
the whisk attachment is ideal for making pancake
batter, mayonnaise, beaten egg whites, chocolate
mousse, butter sauces, whipped cream or smooth
fromage frais.
The variable speed function will enable you to
adjust the speed to suit each preparation and to
start the processing at a lower speed in order to
reduce splashing.
The power mixer is easily assembled and disassem-
bled for maintenance and cleaning.

OPERATING THE POWER MIXER

• OPERATION

The machine is supplied with a single-phase
moulded plug.
6
Mixer
Whisk
Mixing tool
attachment
attachment
Make sure that the grip of the power cord is pushed
well (it is necessary to cross necessarily 2 notches of
the grip, if it is not the case it will be impossible to
put on the control button.
The power mixer is equipped with electrical current
and temperature overload protection. If the power
mixer stops unexpectedly you may try to restart it
by following steps 3-5 below. If the power mixer
does not restart, allow it to cool for a period of up
to 30 minutes and the temperature overload will
automatically reset. You should then be able to
restart following steps 3-5 below.
1. Check that the control button
(CB) is in the released position.
2. Connect the cord to the
power supply
3. Put the tube into the product
w i t h t h e b e l l c o m p l e t e l y
immersed and the splash
guard in place.
4. Press and hold down the
safety button (SB).
5. Press the control button (CB)
and the power mixer will start.
6. Release the safety button
(SB).
7. To stop the power mixer, release the control
button (CB).
Before connecting the
machine, connect ne-
c e s s a r i l y t h e
power cord to
the machine.
(see opposite
2nd notche
First Notche
picture)
SB
VS
CB
LB

• CONTINUOUS OPERATION

8. Follow steps 1-6 above,
then : While the control but-
ton (CB) is pressed, press the
locking button (LB).
9. Release the control button
(CB).
10. Release the locking
button (LB), and the power
mixer will run continuously.
11. To stop the power
mixer, press and release the
control button (CB).

• VARIABLE-SPEED OPERATION

Follow steps 1 to 6 above, then change the speed
of the motor by turning the button (VS) toward the
maximum or minimum as required.
It is advisable to start at a low speed when using the
whisk.
Principal of automatic speed regulation : Once you
have selected the right speed, allow the mixer to run
on it's own. The speed will remain the same, even if
the consistency of the product changes.

• MASHED POTATOES FUNCTION

( MP 350 Turbo Combi, MP 450 Turbo Combi,
MP 450 Turbo FW).
A self-regulating speed system
has been specially developped for
pureeing tasks using the whisk.
SB
CB
LB
MOTOR
HOUSING
TUBE
SPLASH
GUARD
BELL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents