Power integrations TOPSwitch-HX Series Manual page 47

2
0.403 (10.24)
A
0.397 (10.08)
B
0.325 (8.25)
2
0.320 (8.13)
1
Pin 1 I.D.
0.050 (1.27)
BOTTOM VIEW
Exposed pad hidden
1
0.060 (1.52) Ref.
0.019 (0.48) Ref.
0.378 (9.60)
Ref.
END VIEW
www.power.com
eSIP-7F (L Package)
0.081 (2.06)
0.077 (1.96)
Detail A
3
0.016 (0.41)
6×
0.011 (0.28)
0.020 M 0.51 M C
7
0.070 (1.78) Ref.
SIDE VIEW
0.021 (0.53)
7
0.019 (0.48)
0.048 (1.22)
0.046 (1.17)
DETAIL A (Not drawn to scale)
C
0.290 (7.37)
Ref.
0.490 (12.45) Ref.
0.173 (4.40)
0.163 (4.15)
0.084 (2.14)
0.047 (1.19) Ref.
0.100 (2.54)
0.129 (3.28)
0.122 (3.08)
Notes:
1. Dimensioning and tolerancing per ASME
0.020 (0.50)
2. Dimensions noted are determined at the
0.023 (0.58)
0.027 (0.70)
3. Dimensions noted are inclusive of plating
4. Does not include inter-lead flash or
5. Controlling dimensions in inches (mm).
TOP252-262
0.264 (6.70) Ref.
0.198 (5.04) Ref.
7 1
0.089 (2.26)
0.079 (2.01)
3 4
0.033 (0.84)
0.028 (0.71)
0.010 M 0.25 M C A B
TOP VIEW
Exposed pad up
Y14.5M-1994.
outermost extremes of the plastic body
exclusive of mold flash, tie bar burrs, gate
burrs, and interlead flash, but including
any mismatch between the top and bottom
of the plastic body. Maximum mold
protrusion is 0.007 [0.18] per side.
thickness.
protrusions.
PI-5204-061510
6×
47
Rev. J 08/16