Advertisement
STEP 7
Install the tower mounts to the boat deck in the order shown in the diagram.
Note: in the case where the deck of your boat is less than 1/4" thick, a reinforcing kit
is required to thicken and reinforce the deck in the mounting locations.
FLAT DECK - MOUNT ASSEMBLY
STEP 8
8
m12 x 75mm
bLAck nYLon wAShEr
moUnT
nYLon wAShEr
fLAT DEck
rEInforcEmEnT
rUbbEr wAShEr
ALUmInUm bAckInG pLATE
SpLIT Lock wAShEr
nYLon Lock nUT
Measuring from your windshield, check the distance to the
side rail to make sure both sides are symmetric.
CURVED DECK - MOUNT ASSEMBLY
m12 x 75mm
bLAck nYLon wAShEr
moUnT
nYLon wAShEr
cUrVED rUbbEr wAShEr
cUrVED DEck
rEInforcEmEnT
rUbbEr wAShEr
ALUmInUm bAckInG pLATE
SpLIT Lock wAShEr
nYLon Lock nUT
GUIDE#: pwb-ASSAULT-004
Advertisement
