Advertisement
STEP 1
m12 SpLIT
Lock wAShErS
m12 x 45mm
m12 x 40mm
steP 2
STEP 3
5
The mounting feet will need to be assembled to the side
rail fittings, followed by attaching them to the side rails.
LowEr SIDE rAIL
fITTInG
moUnT
Tape off all the areas that may potentially come into con-
tact with the side rails.
Once the feet are connected to the side rails, hold the
side rail up to your boat. Once the rail is aligned with your
windshield use a small piece of tape to mark the position of
the mounting feet.
GUIDE#: pwb-ASSAULT-004
Advertisement
