Advertisement
STEP 6
steP 2
SMALL
DAIMETER
Pilot Hole
Gelcoat
Fibreglass
7
Drilling
Once you have marked your 4 holes, check the
underside of the deck for wires.
If necessary, you should move the wires out of
the way while you drill. We recommend drilling a small pilot
hole which will keep the 17/32" drill bit from walking (mov-
ing). A small rat tail file can be used to ease the edge and
keep the gel coat from chipping.
Be careful of wires!
A
17/32" DRILL BIT
B
counteRsinK
(tHRougH gelcoat)
C
GUIDE#: pwb-ASSAULT-004
Advertisement
