Advertisement
steP 4
STEP 5
steP 2
6
Once the desired position is achieved, place one of the
nylon mount washers over the piece of tape and trace
around it with a permanent marker.
Transferring marks from the other side.
This step is very important! After taping the second side of
the boat in approximately the same areas as the first side
you will need to measure the distance that you marked on
the first side of the boat
It is best to take measurements from the back of the boat
and mark with blue tape. Be sure to measure from the
same point on both sides.
GUIDE#: pwb-ASSAULT-004
Advertisement
