Introduction To Profinet Io Communication; Features; Network Functions And Specifications - Delta VFD-C2000 Operation Manual

VFD-C2000 PROFINET Communication Card CMC-PN01
1 Introduction

1.1 Introduction to PROFINET IO Communication

PROFINET IO is a fieldbus, a family of industrial computer network protocols, and
serves as a communication between programmable logic controllers (PLC) and
distributed field equipment for EtherNet. This protocol recognizes three classes of
devices, IO Controllers, IO Supervisors and IO Devices, and uses three different
communication channels to exchange data: Standard UDP/IP & TCP/IP Channel,
Real-Time (RT) Channel, and Isochronous Real-Time (IRT) Channel. Standard UDP/IP
& TCP/IP Channel is used to parameterize and configure device and asynchronous
operation; RT Channel is used for synchronous data transmission and warning; IRT
Channel is applied to motion control.

1.2 Features

CMC-PN01 connects C2000 drive to PROFINET to exchange data with the host
controller easily. This simple network solution saves cost and time for connection and
installation of factory automation. Moreover, its components are compatible with
suppliers'.
By installing CMC-PN01 in C2000 through the main PROFINET device, you can:
1. Control the drive through PROFINET
2. Modify the drive's parameters through PROFINET
3. Monitor the drive's status through PROFINET

1.3 Network Functions and Specifications

 EtherNet Specifications
Item
Interface
Number of ports
Communication
Mode
Cable
Transmission
speed
Communication
protocol
 Environmental Conditions
Item
Noise immunity
Operating
temperature
Storage
temperature
Vibration/Shock
resistance
4
RJ45
2 ports
IEEE 802.3
Category 5e shielding 100 M
10/100 Mbps auto-negotiate
PROFINET
ESD (IEC 61800-5-1, IEC 6100-4-2)
EFT (IEC 61800-5-1, IEC 6100-4-4)
Surge Teat (IEC 61800-5-1, IEC 6100-4-5)
Conducted Susceptibility Test (IEC 61800-5-1, IEC 6100-4-6)
-10–50°C (temperature), 90% (humidity)
-25–70°C (temperature), 95% (humidity)
International standards
IEC 61800-5-1, IEC 60068-2-6/IEC 61800-5-1, IEC 60068-2-27
Specifications
Specifications
CMC-PN01 Operation Manual