Parameterization Data Of The 3964(R) Procedure - Siemens SIMATIC CP 440 Manual

Configuring and Parameterizing the CP 440
5.3.3

Parameterization Data of the 3964(R) Procedure

Using the parameterization data of the 3964(R) procedure, you can adjust the
CP440 to suit the communication partner.
Parameterization Data of the 3964(R) Procedure
Using the CP 440 Point-to-Point Communication, Parameter Assignment
parameterization interface you set the parameters for the physical layer (layer 1)
and the data link layer (layer 2) of the 3964(R) procedure Below you will find a
detailed description of the parameters.
Section 5.2 describes how to enter the parameterization data using the CP440:
Point-to-Point Communication, Parameter Assignment parameterization interface.
Note
The 3964(R) procedure can only be used in four-wire mode.
5-14
Point-to-point connection CP 440 Installation and Parameter Assignment
A5E00057742-02