LAN hosts, and all models comply with TCP/IP and IEEE 802.3 specifications using standard twisted pair 10/100BaseTX cable as the transmission medium. CN2600 Series Models The CN2600 Series includes the following models: CN2610-8, CN2610- 8-2AC, CN2610-16, CN2610-16-2AC, CN2650-8, CN2650-8-2AC-T, CN2650-8-2AC, CN2650-16, CN2650-16-2AC-T, CN2650-16-2AC, CN2650I-8, CN2650I-8-2AC, CN2650I-16, CN2650I-16-2AC, CN2650I- 8-HV-T, CN2650I-16-HV-T.
Rear Panel CN2650-16 CN2650-16-2AC CN26501-16-2AC CN26501-16-HV-T LCM Display If the CN2600 is working properly, the LCM panel will display a green color. The red Ready LED will also light up, indicating that the CN2600 is receiving power. After the red Ready LED turns to green, you will see a display similar to the following: (Example) CN2610-16: The CN2610’s name...
Press the SEL button to access the item displayed on the bottom line. Refer to the CN2600 Series User’s Manual for more details. Hardware Installation Installing the CN2600 Open the package and attach the CN2600 to a desktop, or fasten it to the rack cabinet.
Connecting to the Network Use an Ethernet cable to connect the CN2600 to the Ethernet network. There are 2 LED indicators located on the top left and right corners of the Ethernet connector. If the cable is properly connected, the CN2600 will indicate a valid connection to the Ethernet in the following ways: The top right corner LED indicator maintains a solid green color when the cable is properly connected to a 100 Mbps...
• For Loopback Wiring: 。The NPort with RJ45 Port : You may refer to the RJ45 Ports pin assignment section to loop back pin 4 and pin 5 for the RS-232 interface to carry out a self test on the device. •...