Table of Contents
Advertisement
RUGGEDCOM WIN7237
Installation Guide
Certification
The RUGGEDCOM WIN7237 base station has been thoroughly tested to guarantee its conformance with
recognized standards and has received approval from recognized regulatory agencies.
CONTENTS
•
Section 5.1, "Approvals"
•
Section 5.2, "EMC and Environmental Type Tests"
Section 5.1
Approvals
The following details the approvals issued for the RUGGEDCOM WIN7237.
CONTENTS
•
Section 5.1.1, "MET Laboratories"
•
Section 5.1.2, "CSA"
•
Section 5.1.3, "TÜV Rheinland"
•
Section 5.1.4, "ISED"
•
Section 5.1.5, "FCC"
•
Section 5.1.6, "Other Approvals"
•
Section 5.1.7, "RoHS"
Section 5.1.1
MET Laboratories
This base station meets the requirements of the following standards:
• ANSI/ISA 12.12.01, CSA C22.2 No. 213
Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous
(Classified) Locations
• EN 60079-0:2009
Explosive Atmospheres – Equipment – General Requirements
• EN 60079-15:2010
Explosive Atmospheres – Equipment Protection By Type of Protection "N"
The base station is marked with an MET classified mark that indicates compliance with both Canadian and U.S.
requirements.
Approvals
Chapter 5
Certification
35
Advertisement
Table of Contents
