Specifications - Mark Levinson 5805 Owner's Manual

SPECIFICATIONS

SPECIFICATIONS
ANALOG LINE STAGE (№5805 ONLY)
Line Input Impedance:
Volume Control:
Gain:
Output Impedance:
Output Overload:
Frequency Response:
Total Harmonic Distortion:
Signal-To-Noise Ratio:
Input Sensitivity:
System Gain:
PHONO STAGE (№5805 ONLY)
Riaa Frequency Response:
Infrasonic Filter:
MOVING-MAGNET MODE
Input Resistance:
Input Capacitance:
Gain:
Total Harmonic Distortion:
Signal-To-Noise Ratio:
Maximum Input Level:
32 N 5805 / N 5802 INTEGRATED AMPLIFIER
0 0
Balanced (XLR): 20kΩ; Single-ended (RCA): 10kΩ
Balanced; voltage mode; digitally-controlled resistor network
8.5dB maximum
55Ω
>4.5V RMS
20Hz to 20kHz, ±0.03dB; <2Hz to 210kHz, +0.1/–3dB (At unity gain volume setting)
<0.01%,1kHz; <0.03%,20 kHz; 2V RMS output (At unity gain volume setting)
>96dB (20Hz to 20kHz, A-weighted); >93dB (20Hz to 20kHz, wideband, unweighted)
(Referred to 2V RMS output, unity gain volume setting)
53mV RMS at line input for 2.83V RMS at speaker output, maximum volume setting
34.5dB, line input to speaker output, maximum volume setting
20Hz to 20kHz, ±0.3dB
Selectable; 20Hz, 1st order (6dB/octave)
47kΩ
Selectable; 20, 70, 120, 170pF
39dB at 1kHz
<0.01%, 1kHz, 2V RMS output; <0.05%, 20kHz, 2V RMS output
>90dB (20Hz to 20kHz A-weighted, referred to 2V RMS output);
>78dB (20Hz to 20kHz, wideband, unweighted, referred to 2V RMS output)
>190mV at 1kHz; >1.6V at 20kHz
/ OWNER'S MANUAL