Installation; Safety; Unpacking The Instrument; Environmental Requirements - Michell Instruments MDM300 User Manual

INSTALLATION

2 INSTALLATION
2.1

Safety

!
2.2

Unpacking the Instrument

The shipping box will contain the following:
• MDM300 Panel-Mount Sampling System
• Flight case (optional)
• 2.5mm Allen key
• 2 x 2.5mm hex bolts
• 2 x 1/8" NPT to 1/8" Swagelok
1. Open the box. If a fl ight case was ordered, the sampling system
will be packaged within it.
2. Remove the sampling panel (or fl ight case, if ordered) from the
box, along with the fi ttings.
3. Save all packing materials in case it is necessary to return the
instrument.
2.3

Environmental Requirements

Refer to the user's manual for information on acceptable environmental conditions in
which to operate the MDM300.
2
MDM300 Sampling System User's Manual
It is essential that the installation of the electrical and
gas supplies to this instrument be undertaken by qualifi ed
adaptors
®
personnel.
97232 Issue 1.4, October 2016