Safety; General Safety; Safety And Instructional Decals - Toro Reelmaster 5010-H Operator's Manual

Safety

This machine has been designed in accordance
with EN ISO 5395 (when you complete the setup
procedures) and ANSI B71.4-2017.

General Safety

This product is capable of amputating hands and feet
and of throwing objects.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not put your hands or feet near moving
components of the machine.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Warning—do not carry passengers.
1. Stored energy hazard—read the Operator's Manual.
1. Cutting/dismemberment hazard; fan—stay away from
moving parts.
93-6689
93–6696
93-7272
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Keep children, bystanders, and pets out of the
operating area. Never allow children to operate
the machine.
•
Shut off the engine, remove the key, wait for all
movement to stop before you leave the operator's
position. Allow the machine to cool before
adjusting, servicing, cleaning, or storing it.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
decal93-6689
1. Warning—do not touch the hot surface.
2. Cutting/dismemberment hazard, fan; entanglement hazard,
belt—stay away from moving parts.
decal93-6696
decal93-7272
1. Engine coolant under
pressure.
2. Explosion hazard—read
the Operator's Manual.
4
, which
106-6754
106-6755
3. Warning—do not touch the
hot surface.
4. Warning—read the
Operator's Manual.
decal106-6754
decal106-6755