Miele CS 1411 Operating And Installation Instructions page 8

Warning and Safety instructions

While the deep fat fryer is under guarantee, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
guarantee is invalidated.

Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.

The deep fat fryer is not intended for use with an external timer
switch or a remote control system.

If the plug is removed from the connection cable or if the cable is
supplied without a plug, the deep fat fryer must be connected to the
electrical supply by a suitably qualified electrician.

If the connection cable is damaged, it must be replaced by a suit-
ably qualified electrician with a special connection cable of type H
05 VV-F (pvc insulated). See "Electrical connection".

During installation, maintenance and repair work, the deep fat
fryer must be completely disconnected from the mains electricity
supply. Depending on country this is done in one of several different
ways:
– disconnect the mains fuse, or
– completely unscrew the screw-out fuse (in countries where this is
applicable), or
– switch off at the wall socket and withdraw the plug from the
socket. Pull by the plug and not by the mains connection cable to
disconnect from the mains electricity supply.

If the deep fat fryer is installed behind a furniture panel (e.g. a
door), ensure that the door is never closed whilst the deep fat fryer is
in use. Heat and moisture can build up behind a closed furniture
panel and cause subsequent damage to the deep fat fryer, the hous-
ing unit and the floor. Do not close the door until the residual heat in-
dicators have gone out.
8