Vaderstad Rapid RDA 400S Original Instructions Manual page 52

Instructions and settings
3.26.2 Scale
Figure 3.60
Weigh calibrations as follows:
1 Press Start/Reset.
2 Hang the empty calibration bag on the scale hook.
3 The weight of the bag is shown. Wait until "Hold" is displayed.
4 Press Start/Reset.
5 Remove the bag and fill it with the calibrated amount.
6 Weigh the filled bag. The scale now shows the net weight of the calibrated amount.
! The scale is switched off automatically after approximately 5 minutes. (1 min. for certain
scales)
! Keep the scale in the calibration box while driving.
! Check the scale against a known weight at regular intervals and always before the start of the
season.
! Change the battery (Type 9V/6LR61) when the battery indicator shows 1 bar or less.
52
2.24
Figure 3.61
Hold
KG
27.06.2011
ver. 2