Hose Length And Hose Holder Adjustment - Vaderstad Rapid RDA 400S Original Instructions Manual

Instructions and settings
3.5

Hose length and hose holder adjustment

B
Figure 3.13
The seed drill is equipped with a folding hose holder.
The holder can be fitted in different positions along the drawbar, and it should be located as close
to the tractor as possible to work best. The hose holder should also, in most cases, be pulled out
to its full length. Try to get the support for the hoses close to the drawbar eye or the intermediate
packer turning point.
The excess length of the hoses is formed into a loop beneath the platform and the hoses are
clamped by the hose holder.
! When the hydraulic hoses are connected to the tractor, the hose holder must be folded forward.
Choose a suitable location by moving the pin, see position A. The lengths of the hoses must be
arranged so that they hang free, even during sharp turns.
! When the hydraulic hoses are disconnected from the tractor, the hose holder must be folded
back. Keep the holder in its upright position with the pin, see position B. The hydraulic hoses
can now hang in the hose holder without the quick-release couplings dragging on the ground
and getting dirty.
24
A
27.06.2011
ver. 2