Vaderstad Rapid RDA 400S Original Instructions Manual page 51

13 Select EXIT and press
Figure 3.59
14 Set the hydraulic fan valve to position A.
3.26.1 Decreasing the scale value of the seed box when the seed hopper is full
The scale value can be reduced in steps of 5-10 scale divisions even after the seed hopper has been
filled. Keep
the scale value. When reducing the scale value to less than a value of 20, keep rotating the roller.
Increasing the feed roller engagement can be done without any risk of squeezing the seed.
27.06.2011
ver.2
.
B
A
on the Control Station pressed for a few seconds and then continue to reduce
RDA 400S
51