Scanning The Safecase Qr Code - Privoro SafeCase User Manual

SCANNING THE SAFECASE QR CODE

After choosing your app settings, a QR code scanner
will open within the app. Hold your iPhone's rear-facing
camera over the QR code on the rear of the SafeCase
until the code is centered within the guidelines on
the screen (Figure 14). Upon successful scanning,
you will receive a confirmation message that you
have successfully paired your SafeCase and app
(Figure 15).
Privoro 9:41 AM 42%
Scan the QR code on the
back of your SafeCase.
Place the QR code inside area
to pair your SafeCase, or
select from a list.
Skip
Figure 14: Scan the QR code on the rear of the SafeCase
Privoro 9:41 AM 42%
Successfully Paired
Continue your SafeCase setup - refer
to step 3 in your setup materials.
Done
Figure 15: Confirmation message
Tap the "Done" button to close the setup assistant
(Figure 16) - opening the app's My SafeCase (home)
screen - and then proceed to the steps below.
TM
Privoro 9:41 AM
Successfully Paired
Continue your SafeCase setup - refer
to step 3 in your setup materials.
Done
Figure 16: Tap the "Done" button
42%
5