Step 3: Inserting the iPhone into the SafeCase smartphone’s cameras and microphones. Step 4: Attaching the lock panel to the SafeCase A physical barrier prevents image capture by Section 3: Managing counter- blocking the cameras, while intelligent audio...
SAFECASE PARTS AND ACCESSORIES The SafeCase ships with a lock panel (which prevents the case from opening) and a charging cable (which charges both the SafeCase and iPhone). In addition to these accessories, the Privoro app on your iPhone pairs with the SafeCase over Bluetooth, allowing you to verify the case’s audio masking, check the battery...
4. Once installed, open the Privoro app (by tapping the Open option in the App Store, tapping the The SafeCase is in shipping mode when it arrives. To Privoro icon on your home screen or searching for power it on for the first time, connect the SafeCase the app).
(Figure 8), unless directed otherwise by your system administrator; this setting is solely necessary for scanning the case’s QR code as part of the SafeCase/ • Location settings: When prompted to allow the app pairing process. When prompted to confirm this app to access your location, tap the, “I want that”...
Place the QR code inside area to pair your SafeCase, or pick from a list. Figure 11: Tap the Done option Skip Figure 9: Scan the QR code on the rear of the SafeCase Privoro 9 41 AM 100% Scan the QR code on the back of your SafeCase.
THE SAFECASE 1. Slide the base tray open: Place your finger(s) on The lock panel is an integral part of the SafeCase and the inside center of the base tray and slide the base is required to ensure audio protections. To complete tray open (Figure 12).
• The corner indicator LEDs pulse green every 10 seconds. It is normal to hear a soft white noise coming from the SafeCase when in protected mode, a result of the audio masking adapting to the noise level in the environment surrounding the SafeCase/iPhone. While in protected mode, most phone features –...
AUDIO PASSTHROUGH MODE: FOR USING SIRI RAISING/LOWERING THE HOOD Temporarily changing to audio passthrough mode is Raising the hood must take place before capturing images/audio; otherwise, the recorded photos, videos necessary for using Siri (as permitted by your system administrator). In this state (Figure 18): and audio will be indecipherable.
2. Look at the audio waveform captured on the screen to confirm that it does not react to the surrounding From the Privoro app, you can verify that audio noise (Figure 24). If necessary, introduce noise into masking is functioning for each of your iPhone’s your environment by speaking or producing other microphones while in protected mode.
Figure 26: Tap the playback icon Section 4: Managing power POWERING ON/OFF To power off the SafeCase, press and hold the rear button for three seconds, until the LEDs start blinking (Figure 27). During the power-down cycle, both the corner indicator LEDs and battery status LEDs will blink green five times.
Devices screen (Figure 31); the charge level (Figure 29). if the app is unable to connect to the SafeCase via Bluetooth, an N/A message will be displayed instead. Figure 28: Press the rear button for one second...
While charging, you can check the charging status by allowing you to simultaneously charge your SafeCase pressing the rear button for one second and iPhone. To charge the SafeCase, connect it to a (see: Checking battery status). power source (charge-capable USB port or wall charger)
Section 6: Removing the iPhone from the SafeCase If you need to remove your iPhone from the SafeCase, use 3. Remove the iPhone from the tray: Slowly pull the the following steps: iPhone out of the SafeCase using a downward motion (Figure 37).
Appendix A: User interface summary Goal Action Notification Changing to protected Corner indicator LEDs pulse green (or yellow, mode (from unprotected Lower the hood if wireless is turned off) every 10 seconds mode) Changing to unprotected Corner indicator LEDs pulse red every 10 mode (from protected Raise the hood seconds...
When use is prohibited, or when asked to do so by authorities, turn off SafeCase or use wireless off mode to turn off SafeCase wireless transmitters. REPAIR Do not attempt to open or repair the SafeCase.
Need help?
Do you have a question about the Safecase and is the answer not in the manual?
Questions and answers