Section 2: Setting Up The Safecase; Step 1: Removing Iphone Accessories; Step 2: Pairing The Safecase And Privoro App; Downloading/Installing And Opening The Privoro App - Privoro SafeCase User Manual

Section 2: Setting up the SafeCase

STEP 1: REMOVING IPHONE ACCESSORIES

To begin setup, remove any protective cases or screen
protectors from your iPhone (Figure 4). Protective cases
and screen protectors may prevent your iPhone from
fitting into the case and may disrupt audio protections.
Figure 4: Remove screen protectors

STEP 2: PAIRING THE SAFECASE AND PRIVORO APP

To enable audio masking verifications and firmware
updates, you'll need to pair your SafeCase
to the Privoro app.
DOWNLOADING/INSTALLING AND OPENING THE
PRIVORO APP
On your iPhone, download the Privoro app from the App
Store using the following steps:
1. Open the App Store app on your iPhone.
2. In the App Store app, select the "Search" option,
enter Privoro in the search field and then tap the
"Search" key.
TM
3. Once the Privoro app is displayed, tap the
"Get" button to download and install (Figure 5).
You may be asked to enter your pin code or
finger print ID before downloading.
Privoro 9:41 AM
Figure 5: Tap the "Get" button
4. Once installed, open the Privoro app by tapping the
"Open" button (or by tapping the Privoro icon on
your home screen).
Once the app has been opened for the first time, a
setup assistant will display. Tap the Next button to
proceed (Figure 6).
Privoro 9:41 AM
Get started.
Follow the on-screen prompts to pair
your SafeCase.
For more information on setting up and
using your SafeCase, see the enclosed
Quick Start Guide.
Next
Figure 6: Tap the "Next" button
42%
42%
3