Section 6: Removing The Iphone From The Safecase - Privoro SafeCase User Manual

Section 6: Removing the iPhone from the SafeCase

If you need to remove your iPhone from the SafeCase, use
the following steps:
1. Remove the lock panel: Press the latch at the top
of the lock panel while simultaneously moving it in
a downward motion (Figure 39). Removing your
iPhone without first removing the lock panel may
damage the SafeCase and iPhone.
Figure 39: Remove the lock panel
2. Slide the base tray open: Place your thumb and
forefinger on the inside center of the base tray and
slide the base tray open (Figure 40). Removing your
iPhone without lowering the base tray may damage
the SafeCase and iPhone.
Figure 40: Slide base tray open
3. Remove the iPhone from the tray: Slowly pull your
iPhone out of the SafeCase using a downward
motion (Figure 41).
Figure 41: Remove the iPhone from the tray
To insert your iPhone back into the SafeCase, use the
same steps taken during setup (see: Inserting the
iPhone into the SafeCase).
TM
13