Section 4: Managing Power; Powering On/Off - Privoro SafeCase User Manual

10
To listen to the recording, tap the playback icon
(Figure 30). Audio captured when the hood is
down should be masked by randomized noise.
Privoro 9:41 AM 42%
Verification
REAR MIC FRONT MIC BOTTOM MIC
00:03:33
Start a New Recording
My SafeCase Verification Help About
Figure 30: Tap the playback icon
You may repeat the above steps for your iPhone's
other microphones.

Section 4: Managing power

POWERING ON/OFF

To power off the SafeCase , press and hold the rear
TM
button for three seconds, until the LEDs start blinking
(Figure 31). During the power-down cycle, both the
corner indicator LEDs and battery status LEDs will blink
green five times.
Similarly, to power on the SafeCase, press and hold
the rear button for three seconds, until the LEDs start
blinking. During the power-on cycle, both the corner
indicator LEDs and battery status LEDs will blink green
five times. Once powered on, the corner indicator LEDs
will pulse green (to indicate protected mode) or red (to
indicate unprotected mode).
Figure 31: Press and hold the rear button for three seconds