Man B&W L35MC6-TII Project Manual page 117

MAN B&W
Refe­
Cyl. no.
rence
Diam. PCD Thickn. Diam.
AR 5-9 30
AS 5-9
AT 5-9
AV 5-9 85
BB 5-9
BB 5-9
BX 5-9
BF 5-9
BV 5-9
* DN indicates the nominal diameter of the piping on the engine. For external pipes the diameters should be calculated
according to the fluid velocities (see list of capacities) or the recommended pipe sizes in diagrams should be used.
Table 5.10.01: List of counterflanges, 6L35MC6 with turbocharger on aft end. Reference is made to section 5.09
Engine Pipe Connections
MAN B&W L35MC6
Flange Bolts
00 6 M2
Coupling for 6 mm pipe
Coupling for 20 mm pipe
45 20 M6
Coupling for 0 mm pipe
Coupling for 0 mm pipe
Coupling for 0 mm pipe
Coupling for 0 mm pipe
Coupling for 20 mm pipe
DN * Description
No.
4 40 Oil vapour disharge
Cooling water drain air cooler
Fire extinguishing in scavenge air box
4 65 Drain from scavenge air chambers to closed drain tank
Remote speed setting signal
Supply to remote speed setting
Steam inlet for heating fuel oil pipes
Steam outlet for heating fuel oil pipes
Steam inlet for cleaning of drain scavenge air chambers
MAN Diesel
5.10
Page 2 of 2
112 13 73-3.1.0
198 63 62-1.0