Samsung S4335-AW Series User Manual page 26

Notes for Using the Detector
Handling
-
WARNING:
Using the detector while other electronic devices are being operated nearby may affect the
•
performance of the detector. If you use other wireless equipment that has similar frequencies,
such as smartphones, at the same time as the detector, the detector may
experience wireless connection issues. Capturing images while the Auto Bed or Moving Grid is
operated may affect the results.
Do not pull the cable by force. If the cable is tangled, do not pull the detector body by force.
•
Otherwise, the cable may become damaged, resulting in electric shock.
WARNING:
Be careful not to strike, drop, or cause any impact to the detector. When using the detector ensure that it is placed on
•
a flat surface otherwise the detector may be bent or be caused to malfunction.
There would be damage if the detector is partly pressed without battery mounted. It is recommended to use it
•
with battery mounted in both wired and wireless mode.
CAUTION: Precautions When Connecting Detector and Cable
• If foreign material has adhered to the connector between detector and cable, image transmission time is likely to be
delayed. Follow the cleaning tips below to clean the connectors.
Be careful to ensure that metal or other conductive material does not adhere to the pin connector of both the
•
detector and the cable.
Remove any conductive material on the detector magnet and cable using sticky tape.
•
Clean the detector's pin connector of using a commercial plastic brush to avoid damage to the pins.
•
BEFORE X-RAY EXPOSURE
-
F 6 D N D
IGURE O OT ROP
F 7 Location Considerations
IGURE
26