Related Manuals for Samsung ADT SmartThings F-ADT-PIR-1
Summary of Contents for Samsung ADT SmartThings F-ADT-PIR-1
- Page 1 PRINTER’S INSTRUCTIONS: MANUAL,QUICK START,NOVA,PIR - NORTEK P/N: 10015709C- INK: BLACK PLUS PMS 286C - MATERIAL: 105G COATED PAPER - SIZE: 105MM X 105MM - SCALE: 1-1 - BINDING: TRIM, FOLD AND SADDLE STITCHED - PAGE 1 OF 16 ADT Motion Detector Setup Guide...
- Page 2 Setup Take the ADT Motion Detector to where you intend to mount it after setup. • Make sure you are within 350 feet from the ADT Security Hub. (Exact range depends on your home’s construction, the environment, the position of the ADT Security Hub, and the position and number of other connected devices.) •...
- Page 3 Setup 2. Use the SmartThings app on your smartphone to select the “My Home” tab. Select "Things", and then “Add a Thing". 3. Use the SmartThings app to scan the QR code on the front of the detector and then follow the on-screen instructions to complete setup.
- Page 4 Setup 4. Remove the tab on the detector marked “Pull This Tab”. Battery Tab Walk Test Button...
- Page 5 Setup 5. Remove the QR code from the front of the detector and attach it inside the ADT Security Hub User Guide for future reference.
- Page 6 Placement Place the ADT Motion Detector in a high-traffic area • where an intruder would be likely to pass within a 30-foot range, e.g. living room or hallway. • Make sure that there are no objects blocking the detector's view and that it's in a stable location. •...
- Page 7 Placement • Make sure that you do not place the detector facing windows where car headlights could cause false alarms. 30 Feet Range Coverage In Both Directions...
- Page 8 Mounting Pick a location 6.5 to 7.5 feet above the floor and mount the detector on a flat wall or in a corner. Corner Mount Wall Mount Bracket Flat Wall Mount Detector (Back) Detector (Front)
- Page 9 Mounting Adjust the angle of the detector using a screwdriver. Adjust With Screwdriver You can also use the supplied mounting tape if you do not want to use the wall bracket. Double Stick Tape Here For Flat Walls...
- Page 10 Testing You can test the coverage of the ADT Motion Detector by pressing the Walk Test button on the side. For the next 10 minutes, the red LED will illuminate when it senses movement, allowing you to adjust the aim of the detector to cover the desired protection area.
-
Page 11: Troubleshooting
Troubleshooting If the detector did not pair successfully with the ADT Security Hub, follow these instructions to reset it: Press and release the Tamper Switch on the detector twice. Press and hold the Tamper Switch. The red LED will begin to blink quickly, and after a short period of time will stay on. - Page 12 Suggestions The ADT Motion Detector monitors motion in a defined area of your home. When motion is detected, a notification is sent wirelessly to your ADT Security Hub. Your ADT Security Hub can then send an alert to your smartphone, automate connected devices, or initiate optional ADT professional monitoring services (additional fees apply).
- Page 13 Suggestions There are many ways you can use an ADT Motion tion Detector in your home: • Put one in your hallway or near your back door and set it to initiate optional ADT professional monitoring services if an intrusion is detected in your home (additional fees apply).
- Page 14 Suggestions • Put one in your storage room and set a connected camera to send you a video alert when unexpected activity is detected (additional fees may apply). Note: To ensure proper functioning, all connected devices must be configured correctly. Visit SmartThings.com/Welcome for more ideas, tips, and special offers.
-
Page 15: Works With Smartthings
Works With SmartThings SmartThings works with a wide range of connected devices, including lights, cameras, locks, thermostats, and sensors. It also works with the Google Assistant and Amazon Alexa so you can control your smart home with voice commands. Look for the Works with SmartThings label next time you’re buying a connected device for your home, or visit SmartThings.com to see the full list of compatible devices. - Page 16 SmartThings, Inc., 665 Clyde Ave, Mountain View, CA 94043, USA. Information in this document is subject to change without notice. Copyright 2017 SmartThings, Inc. All rights reserved. ADT and the ADT logo are marks and/or registered marks of ADT. Unauthorized use is strictly prohibited.