Label; Maintenace, Cleaning And Disposal - Samsung S4335-AW Series User Manual

Digital flat-panel x-ray detector
Table of Contents

Advertisement

Label

□ For information on the types and attachment locations of the Detector Component labels, refer to Labels.
WARNING

Maintenace, Cleaning and Disposal

 Maintenance
Inspect the equipment periodically for patient and user safety.
The instrument must be repaired by a qualified engineer only. If it is not repaired properly, it may cause fire, electric
shock, or accident.
The S4335-AW series,S4343AW/SZ4343-W are rated IP54 of water-resistant and dustproof according
to IEC 60529 standard.
Despite this classification, S3025-W is not impervious to water damage in any situation. It is important that all
compartments are closed tightly.
Follow these tips carefully to prevent damage to the detector
- Whenever your device gets wet, dry it thoroughly with a clean, soft cloth.
- Do not expose the detector to salt water or ionized water.
- IP54 of water-resistant and dustproof is only guaranteed in case of all covers are closed tightly and in wireless mode,
disconnected from tether.
- Battery cover is consumable parts ,so these parts should be replaced periodically
- Covers may be loosened slightly if the detector is dropped or receives an impact. Ensure that all the covers are properly
aligned and tightly closed. Otherwise, they may not provide protection from water and dust.
.
 Cleaning
□ Always turn off the equipment completely before cleaning.
WARNING
□ Do neither open the cover nor insert liquids into the system.
WARNING
□ When cleaning the exterior of the system, use a soft cleaning cloth dampened with tepid Water and soap. Do not use
detergents or chemical solutions.
WARNING
□ While a maintenance personnel is cleaning the room, cables connected to the equipment may be lifted or pulled.
When lifting , or pulling cables, the connection with the equipment may be disconnected causing malfunction, electric
WARNING
shock, or danger of fire. Also, water may be absorbed into the equipment if mopped with a damp cloth, which may cause
electric shocks or fire.
□ If the equipment generates abnormal noises, contact the service center immediately. The user must not arbitrarily
disassemble, repair, or modify the equipment. Fire or electric shock may result.
WARNING
□ Always be sure to keep checking the condition of the system and the patient to ensure they are normal
during the use of the instrument. If any problem is found, take appropriate measures, such as stopping
the operation of the instrument, as required.
WARNING
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S4343-awS4335-awS4335-awvSz4343-w

Table of Contents