System Maintenance Checkpoints - Samsung S4335-AW Series User Manual



System Maintenance Checkpoints

To ensure the system performance and usability along with safety, regular maintenance and checking the
condition are required. To secure safety of both patient and operator and to ensure the performance of the
system, check the system on a regular interval. For periodic inspection of the system, consult your dealer
or the manufacturer's service center.
No. Item
1 Noise / Vibration
2 Power Supply box While in use
3 Appearance
4 Cables
5 Grounding
Installation
6
Checkpoints
□ When inspecting on checkpoints requiring no power, please make sure to keep the system turned off.
Classification
- The type of protection against electric shock: Class I equipment
- The degree of protection against electric shock: Type B applied part
- The degree of protection against ingress of water: Ordinary equipment
- The method(s) of sterilization or disinfection: Not applicable
- The degree of safety of application in the presence of a FLAMMABLE ANAESTHETIC MIXTURE WITH AIR
or WITH OXYGEN OR NITROUS OXIDE: Not applicable
- Mode of operation: As momentary continuous operation
Category Checkpoints
Check noise and vibration from each
In use
operating parts of the system.
Check the power supply box voltage
while the equipment s turned off.
Run a visual inspection to check if the
appearance shows any abnormalities,
While in use such as loosened bolts or had grips,
transformation, etc. while the equipment
is turned off.
Check cable runs for worn out cables,
Before Using
damage or short circuited, broken wires,
etc. while the equipment is turned off.
Check the earth-grounding is intact, not
While in use broken or loosened terminal. (Grounding
resistance should be below 0.1Ω.)
When
When installing, check that the
Installing equipment is leveled and firmly fixed.
Table 2 S M
YSTEM AINTENANCE
C
HECKPOINTS
12
Check
Remark
Interval
1 year
1 year
1 year
6 months
1 year
1 year