Table of Contents
Advertisement
Chapter 2 Installation and Connection
5.1
Setup Flow
Describes the setup flow for each configuration.
Please perform the setup according to the system configuration used by the customer.
(1) When the configuration
consists of one unit of
NeoFace Access
Control
First time setup of NeoFace Access
Control (Master)
[See Figure 5.2]
Registration (Master) of NeoFace
Access Control with WebUI
[See Figure 5.4]
Registers persons entering and exiting
via NeuFace Access Control (master)
or from the WebUI on an external PC
(See Section 2, Chapter 3)
66
System
configuration
of the
customer
(2) When NeoFace Access Control (master）
– NeoFace Access Control (slave)
First time setup of NeoFace Access
Control (Master)
[See Figure 5.2]
Registration (Master and slave) of
NeoFace Access Control with
WebUI
[See Figure 5.4]
First time setup of NeoFace Access
Control (Slave)
[See Figure 5.2]
⇒ After transition of standby
Maintenance screen
screen
Registers persons entering and exiting via
NeuFace Access Control (master) or
from the WebUI on an external PC
(See Section 2, Chapter 3)
NeoFace Access Control User's Guide
(3) When NeoFace Access Control
Manager – NeoFace Access Control
(slave) configuration is used
configuration is used
First time setup of NeoFace Access
Control Manager
[See Figure 5.3]
Registration (Slave) of NeoFace
Access Control with WebUI
[See Figure 5.4]
First time setup of NeoFace Access
Control (Slave)
[See Figure 5.2]
⇒ After transition of standby screen
Maintenance screen
Registers persons entering and exiting
from the WebUI on an external PC
(See Section 2, Chapter 3)
Setup
5.
Advertisement
Table of Contents
