Table of Contents
Advertisement
Use specified power supply voltage (DC 9 V to 30 V)
Using with an incorrect power supply voltage may cause fire, electric shock, or failure.
Do not use extension cords
Do not install NeoFace in any environment that requires an extension cord. Connecting to a cord that does not
conform to the power supply specifications of
Do not overload the electrical circuit
The electric current exceeding the rated flow overheats the outlet, which may cause a fire.
Do not unplug the power cord by holding the cable.
Pull the power cord straight out by holding the plug. Pulling the power cord by holding the cable or applying extra
pressure to the connector may damage the cable and may cause a fire or electric shock.
Do not drop or subject to an impact
Do not drop or subject the AC adapter to an impact This may cause the adapter to break or malfunction.
Insert the power plug into the outlet.
Insert the plug of power cords into the outlet completely. Arcing may be caused by inserting the plug halfway
increasing the possibility of fire. Heat will be generated if condensation is formed on a plug that is covered in dust,
which may cause a fire.
Use specified AC adapter and power cord
Use the power cord provided with the AC adapter purchased as an option. If electric current exceeding the rating
flows in the power cord may cause a fire.
Also, observe the following precautions to prevent electrical shock or fire caused by a damaged power cord.
●
Do not stretch the cord harness.
●
Do not bend the power cord.
●
Do not twist the power cord.
●
Do not step on the power cord.
●
Do not alter, modify, or repair the power cord.
equivalents.
●
Do not use a damaged AC adapter or power cord. Replace the damaged power cord with a power cord of the
same standard. Contact your sales representative for replacement.
Do not use the AC adapter or power cord for any other devices or usage.
The AC adapter purchased as an option or power cord provided with NeoFace is designed for connecting to and
using with NeoFace, and its safety has been tested. Never use the attached power cord for any other purpose. Not
following this instruction may cause electrical shocks or a fire.
Do not disassemble
Never disassemble the AC adapter. This may cause the adapter to break or malfunction.
Indoor use
Use the AC adapter indoors. When using the AC adapter outdoors, take adequate measures such as placing in a
dust proof/ waterproof cabinet avoiding exposure to direct sunlight and rainwater.
NeoFace Access Control User's Guide
Precautions for Use
Caution
NeoFace
may cause fire due to overheating.
● Do not pinch the power cord.
● Keep chemicals away from the power cord.
● Do not place any object on the power cord.
● Do not twist the power cord.
● Do not secure the power cord with staples or
Please be sure to read
(
)
5
Advertisement
Table of Contents
