Table of Contents
Advertisement
Chapter 1. Introduction
3.3
Lamp Indication
The lamp indication of NeoFace and meaning are as follows.
Power lamp
POWER Lamp
Lights up in green when the power is turned ON.
If "System Hardware" - "Power LED Control" in the BIOS setup menu is changed to "Disabled", the lamp will always be lit
in green when the power is connected.
LINK/ACT Lamp
This lamp represents the state of the standard LAN port. When power is supplied to NeoFace and hub, and they are
connected correctly, the LINK lamp lights in orange color. ACT lamp flashes in orange color when the port is transmitting
or receiving.
If the lamp is not turned ON even in the LINK state, check the status of the network cable and connection with the hub.
SPEED Lamp
Indicates at which standard the LAN port communication mode is operating.
The LAN port supports 1000BASE-T (1Gbps), 100BASE-TX (100Mbps) and 10BASE-T (10Mbps) and the display
changes according to the mode as follows.
●
Orange light: Operates at 1000BASE-T
●
Green light: Operates at 100BASE-TX
●
Light off: Operates at 10BASE-T
LINK/ACT lamp
NeoFace Access Control User's Guide
Main Unit Description
3.
SPEED lamp
49
Advertisement
Table of Contents
