Interface Cable; Dido Connector - NEC EGW101 User Manual

Neoface access control
Table of Contents

Advertisement

Chapter 2 Installation and Connection
4.5

Interface Cable

After connecting the interface cable, connect the power cord.
Take the following precautions while connecting.
Use shielded cable for LAN and USB cable,
Please ensure that the plugs of the power cord are not pressed.
4.6

DIDO Connector

When using digital input and output, connect the cables following the procedure given below.
1.
Remove the DIDO connector from the main unit
When a minus precision screwdriver is inserted into the hole of the square □ opening adjacent to
2.
the terminal to which must be attached, then the connection terminal opens.
60
When connecting to the gate, connect to the D 02 pin.
Tip
NeoFace Access Control User's Guide
Connections
4.

Advertisement

Table of Contents
loading

Table of Contents