Chapter 2 Installation and Connection
3.
Keeping the minus precision screwdriver inserted, insert the cable into the open connection terminal all the
way to the bottom end of the connection terminal.
4.
Remove the minus precision screwdriver
The connection terminal is closed and the cable is fixed.
5.
Attach the connector to which the cable is connected to NeoFace.
4.7
Power Supply Connector
Follow the procedure given below to connect the cables when using the power supply connector (Terminal 2 Pin).
* The DC power source should have double/reinforce insulation before connecting to EUT.
1.
Loosen the left and right screws and remove the power supply connector (Terminal 2 Pin) from the main unit.
NeoFace Access Control User's Guide
Connections
4.
61