Disassembly - Denon DN-X400 Service Manual

DISASSEMBLY

(Follow the procedure below in reverse order when reassembling)
Front Panel Unit
1. Remove 6 screws and pull up Front Panel Unit.
57
2. Disconnect FFC cable and Connector.
3. Detach Front Panel Unit.
Note: Do not pull out aslant to prevent FFC cable damage.
Do not fail to pull AC cord from wall outlet before
disconnect the FFC cable.
If AC cord is remained plugged into wall outlet,
power is kept supplied in the unit, which may cause
danger.
FFC
Feder Unit
1. Remove 2 screws and pull up Feder Unit.
53
2. Disconnect Connector.
Fader Unit
57
Connector
Connector Connector
FFC
Connector
57
Front Panel Unit
57
FFC
53
Fader Unit
DN-X400
57
57
57
53
3