Pan Supports; Burner - Miele CS 1028 G Operating And Installation Instructions

Pan supports

 Remove the pan supports.
 Clean the pan supports in the
dishwasher or with a solution of warm
water and a little washing-up liquid
applied with a soft sponge. Stubborn
soiling should be soaked first.
 After cleaning, dry the pan supports
thoroughly with a clean cloth.
Cleaning and care

Burner

The burner components are not
dishwasher safe.
The burner components should only
be cleaned by hand.
The surface of the burner cap will
become duller with time. This is
completely normal and does not
indicate material deterioration.
 The burner should be dismantled and
then cleaned by hand using a
solution of warm water and a little
washing-up liquid applied with a soft
sponge.
 Clean any soiling from the flame
openings with the brush supplied.

Danger of explosion!
Blocked flame openings can cause a
dangerous build-up of gas in the
base of the hob which could ignite
and cause an explosion. This can
lead to damage to the appliance and
injury.
Ensure the flame openings are kept
clean at all times.
 Parts of the burner that cannot be
removed should be wiped clean with
a damp cloth only.
 The ignitor and thermocouple should
be very carefully wiped clean using a
well wrung out cloth.
The ignitor must not get wet,
otherwise it will not spark.
 Finally dry everything thoroughly with
a clean cloth. Make sure that the
flame openings are completely dry.
27