Miele CS 1028 G Operating And Installation Instructions page 41

Natural stone worktops
You will need heavy duty double-sided
tape (not supplied) to secure the
spring clamps and spacer bars.
 Stick the tape  to the top edge of
the cut-out in the positions shown in
the diagram.
 Position the spring clamps  and
spacer bars  on the top edge of the
cut-out and press them firmly into
place.
 Apply silicone to the side and lower
edges of the spring clamps  and
the spacer bars .
 Then fill gap  between spacer
bar  and the worktop with silicone.
Installation
41