Rigol DS1000Z Series Quick Manual page 34

RIGOL
When the impedance of signal source is set to 50 Ω,

the bottom of the Source1 Waveform.
Only available to MSO1000Z-S and DS1000Z-S.

20. Source2 Waveform
Display the type of waveform currently set for Source2.

When the modulation is enabled,

Source2 Waveform.
When the impedance of signal source is set to 50 Ω,

the bottom of the Source2 Waveform.
Only available to MSO1000Z-S and DS1000Z-S.

21. Notification Area
Display sound icon and USB disk icon.
Sound Icon: Press Utility  Sound to enable or disable the sound. When

the sound is enabled,
will be displayed.
USB Disk Icon: when a USB disk is detected,

22. Operation MENU
Press any softkey to activate the corresponding menu.
The following symbols might be displayed in the menu:
Denote that you can rotate the multifunction knob
parameters. The backlight of
modification.
Denote that you can rotate
currently selected is displayed in blue, press down the knob to enter the
corresponding menu. The backlight of
with this symbol are selected.
Denote that press
the pop-up numeric keyboard. The backlight of
menus with this symbol are selected.
Denote that the current menu has several options.
Denote that the current menu has a lower level menu.
Press this key to return to the previous menu.
The number of the dots denotes that the number of the pages the
current menu has.
20
will be displayed at the bottom of the
will be displayed; when the sound is disabled,
turns on during the parameter
to select the desired item, the item
to input desired paramrter values directly using
will be displayed at
will be displayed at
will be displayed.
to modify
is constant on after menus
is constant on after
MSO1000Z/DS1000Z Quick Guide