Table of Contents
Advertisement
System Tests
Use the test menus to test DryView 8600 Laser Imager operation.
Note
While running system tests, you cannot acquire and print images.
You can run the following tests on the imager:
1. QC Step Wedge – Prints a QC step wedge for use in the daily quality control
process (see Section 4).
2. Print SMPTE Pattern – Prints four stored test pattern images on one film.
3. Keypad Test – Tests keypad and individual key functions.
4. Display Software Versions – Displays versions for software programs that run
the imager.
5. Display System Configuration – Displays current system configuration values
such as image memory, contrast and density parameters for each input (user).
Test Menus
2000 March Rev. B
8186546
QC Step Wedge
See page 5-15
Print SMPTE
Pattern 4:1
See page 5-15
Keypad Test
See page 5-16
Display Software
Versions
See page 5-17
Display System
Configuration
See page 5-18
Section 5 – Troubleshooting
5-13
Advertisement
Table of Contents
