Table of Contents
Advertisement
DryView 8600 User Guide
6. To print the images acquired at any time, press the Print button (8). Any blank
image locations are printed at background density.
Note
If Autoprint is ON, images also print when the number in the Images Acquired
indicator (5) equals the number in the Format Selected indicator (3).
Note
The number of images printed is determined by the Number of Copies to Print
setting.
7. To print additional copies, press Print (8) whenever the Press PRINT for
ADDITIONAL copy indicator (9) is illuminated. Each button press prints one
additional copy.
Note
If the Memory Full indicator (10) lights, wait until the indicator goes out before
pressing Acquire again.
Note
If the Check Imager indicator (6) lights with no associated beep when the
acquisitions are successful, there is a condition such as out of film, or film jam
at the imager, which is not currently affecting acquisitions.
Note
If a film jam occurs during printing, the Check Imager indicator (6) lights, and
the local panel displays an associated message. Clear the jam (see page 5-7,
Troubleshooting, for instructions). When the jam is cleared, the machine
restarts the print sequence.
3-4
8186546
2000 March Rev.B
Advertisement
Table of Contents
