1
Equipment and accessories
1.1
Typical installation
Figure 1-1
Figure 1-1:
A.
B.
C.
D.
E.
F.
G.
H.
1.
2.
Quick Start Guide
shows a typical installation for a Rosemount
™
Rosemount
CT4215 Parts
1
Sample head
: draws air from around the packaged product into the measurement cell.
Analysis cell: the laser beam and sample gas pass through here for analysis.
Electronics: laser, detector, PLC, and DC power supply.
Air preparation: compressed air must be filtered and dried for optimum performance.
Vacuum pump: high flow rate pump for fast sample delivery to measurement cell.
2
Reject mechanism
: compressed air reject mechanism.
Touchscreen HMI: user interface for system.
PLC panel screen: screen set to certain PLC parameters. This will be locked to operators under
normal operation.
Sample head is modular and may differ depending on application.
May differ depending on application.
Equipment and accessories
™
CT4215 on a food handling line.
1