NEC SV9300 User Manual page 3

To return to caller on Hold:
1.
Press held line
To transfer a call:
1.
Ask the party to hold
2.
Press Transfer
3.
Dial the extension number
4.
You may announce the call (optional)
5.
Hang up to complete transfer
(If the extension is busy, press Transfer again to go back to the original
caller)
To transfer a call directly into a mailbox:
1.
With a call in progress, press Transfer
2.
Dial 8500
3.
When system answers, press *8 plus mailbox number
4.
Hang up to connect
To Establish a Conference Call:
1.
With an established call, press Transfer to obtain a "stutter"
tone.
2.
Dial the second party and announce to second party that you
are establishing a conference call
3.
Press the CNF soft key to connect all parties
Three-way conference is established. (If one party hangs up, the other
two remain connected)
FEATURE KEYS & ACCESS CODES
Blank keys on your phone can be programmed as One Touch Speed
Dials
Programming ONE TOUCH SPEED DIALS:
1.
With the handset in the cradle, press Feature
2.
Press desired ONE TOUCH key
3.
Dial the number you want, including "9" if it is an outside
number
4.
Press Feature again to save the number
"SPD SET" will display in LCD screen
Programming NAME for One Touch Speed Dial:
1.
Press Menu key
2.
Press 2 for Directory
3.
Press down arrow on Cursor Key until desired number shows
in display
4.
Press ENTRY soft key
5.
Press NAME soft key
6.
Enter desired name via keypad
7.
Press SET soft key
To access One Touch Speed Dial numbers:
1.
Once programmed as above, press desired ONE TOUCH key
PHONE INSTRUMENT SET-UP
The CURSOR key can be used to adjust LCD Contrast, speaker/receiver
volume and ringer volume.
LCD Contrast
Press up or down on CURSOR key while idle
Speaker/Receiver Volume
Press up or down on CURSOR key while in conversation
Ringer Volume
Press up or down on CURSOR key while ringing
Change Ring Tone
1.
With handset down
2.
Press FEATURE 3, continue pressing 3 this until you hear
the tone you want to select (14 different ring tones). Press
FEATURE to save.
Microphone On/Off
1.
Press MIC key
If the microphone is off, callers will not hear you on the speakerphone.
3