Indoor Temperature Checking Function; Blade Selection - Samsung MWR-WE11N User Manual

Indoor Temperature Checking Function

This function allows you to check the current indoor temperature.
Press the Room Temp. button to check the current indoor temperature.

Blade Selection

Select only the desired blade to set Air fl ow function.
When the air conditioner is on
NASA_Wired Remote Control_MWR-WE10N_EN_IB_DB68-06362A-01.indd 13
The current indoor temperature will be displayed.

3 seconds after displaying the indoor temperature, the set temperature

will appear.
• Indoor unit temperature will be indicated by 0.5 °C(1 °F) units.
• Depending on the installation location of your Wired Remote
Controller, the current indoor temperature can be diff erent.
• If the temperature display setting is set to indoor temperature
and you press the Room Temp. button, then the
will appear.
1. Press the Blade button to select a blade to set the wind direction.
Each time you press the button, it will toggle between

.
→ →
The number corresponding to the selected blade will blink.

2. Press the Air Flow button to select the Air fl ow direction of the selected blade.
• Depending on the individual setting, a diff erent blade could be
selected.
• The blade that can be selected may diff er depending on the
model.
• If the indoor unit is off or the blade selection function is not
supported, and you have pressed the Blade button, then the
lamp will be displayed.
lamp
→ →
13
2016-08-01 오전 9:18:03