Air Swing; Indoor Temperature Checking Function - Samsung MWR-WE10N Manual

Air Swing

This function allows you to shift the air flow direction up and down.
Press the Air Swing

Indoor Temperature Checking Function

This function allows you to check the current indoor temperature.
Press the Indoor Temp. button to check the current indoor temperature.
12
NASA_Wired Remote Control_MWR-WE10N_EN_IB_03732A(1).indd 12
button to tilt the blade up and down.
Press the Air Swing

when the blade reaches the desired position.
The up/down tilting of the blade will stop in place.
• With the duct type indoor unit, the air flow direction cannot
be adjusted. If you press the Air Swing
the
The current indoor temperature will be displayed.

3 seconds after displaying the indoor temperature, the set temperature

will appear.
• Indoor unit temperature will be indicated by 0.5°C(1°F) units.
• Depending on the installation location of your Wired Remote
Controller, the current indoor temperature can be different.
• If the temperature display setting is set to indoor temperature
and you press the Temp. button, then the
will appear.
button one more time to set the air flow direction,
lamp will appear.
button,
lamp
2013-02-01 오후 6:23:17