The use of there are some basic steps common to all a dampener with Giant Industries, Inc. pumps pumps. The following information is to be is optional, although recommended by Giant considered as a general outline for instal- Industries, Inc.
Page 5
P200A-3100 SERIES PARTS LIST ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY. 08300A Crankcase, Anodized 08456-0100 Tension Screw, 316 S.S. 08301 Dipstick 07204-0100 Crush Washer, 316 S.S. 08302A Crankcase Cover, Anodized 1 07203 Support Ring, 08302-L Crankcase Cover, 07023 O-Ring, Long (Optional)
Page 6
REPAIR INSTRUCTIONS - P200A-3100 SERIES With a 22mm socket By inserting a small screw Using a needle nose pliers, wrench, remove the (3) remove the inlet and dis- driver between the valve discharge valve plugs and charge valve assemblies seat (27) and the valve (3) inlet valve plugs (32) spring retainer (30), the (27-30), for P230-3100 only,...
REPAIR INSTRUCTIONS - P200A-3100 SERIES Disassembly sequence of the back end of the P200A-3100 series pump. Before you begin, drain the oil from the crankcase. Remove the crankcase cover (3) and o-ring (4) from the crankcase (1). To remove the crankshaft (13), remove the bearing cover (7) and sight glass (8).
Page 8
A Returned Goods Authorization (R.G.A.) number and completed warranty evaluation form is required prior to the return to Giant Industries of all products under war- ranty consideration. Call (419)-531-4600 or fax (419)-531-6836 to obtain an R.G.A. number.