500 operating hours, after 1 year if used less. Giant Plunger Pumps are suitable for pump- ing clean water and other non-agressive or Caution when operating in damp places or abrasive media with a specific weight similar to with high temperature fluctuations.
Spare Parts P225/P226/P223/P228 Pumps ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY. 08300 Crankcase 07778 Plunger Pipe 06773 Oil Dipstick with O-Ring 08456 Tension Screw 08302 Crankcase Cover, Short 07676 Copper Gasket 08302-L Crankcase Cover, Long 08442 Wrist Pin 07190 Drain Plug &...
Page 6
REPAIR INSTRUCTIONS - P225/P226/P223/P228 PUMPS NOTE: Always take time to lubricate all metal and nonmetal parts with a light film of oil before reassembly. This step will ensure proper fit, at the same time protecting the pump nonmetal parts (i.e., the elastomers) from cutting and scoring.
Page 7
Seal Spare Parts (1 kit/pump) (see page 9 for kit list) Oil Seal Kit (1 kit/pump) (see page 9 for kit list) Valve Spare Parts (1 kit/pump) (see page 9 for kit list) NOTE: Contact Giant Industries for Service School Information. Phone: (419)-531-4600...
Page 8
A Returned Goods Authorization (R.G.A.) number and completed warranty evaluation form is required prior to the return to Giant Industries of all products under war- ranty consideration. Call (419)-531-4600 or fax (419)-531-6836 to obtain an R.G.A. number.