Giant P200A-5100 Series Operating Instructions Manual
Plunger pump, 18mm standard and viton versions
Hide thumbs
Also See for P200A-5100 Series:
- Repair and service manual (16 pages) ,
- Operating instructions manual (12 pages) ,
- Operating instructions/ repair and service manual (16 pages)
Table of Contents
Advertisement
Quick Links
P200A-5100
SERIES PUMPS
18mm Standard and Viton Versions
Updated 08/22
Standard Versions:
Viton Versions:
Contents:
Installation Instructions:
Pump Specifications:
Exploded View:
Parts List / Kits:
Trouble Shooting Guide:
Repair Instructions:
Torque Specifications:
Preventative Maintenance and
Recommended Spare Parts List:
Pump mounting selection Guide:
Dimensions:
Warranty Information:
Triplex Ceramic
Plunger Pump
Operating Instructions/
Repair and Service Manual
P200-5100
P200-5111
page 2
pages 3
page 4
page 5-6
page 7
pages 8-9
page 10
page 10
page 10
page 11
back page
Advertisement
Table of Contents
Related Manuals for Giant P200A-5100 Series
Summary of Contents for Giant P200A-5100 Series
- Page 1 P200A-5100 Triplex Ceramic Plunger Pump Operating Instructions/ SERIES PUMPS Repair and Service Manual 18mm Standard and Viton Versions Standard Versions: P200-5100 Viton Versions: P200-5111 Contents: Installation Instructions: page 2 Pump Specifications: pages 3 Exploded View: page 4 Parts List / Kits: page 5-6 Trouble Shooting Guide: page 7...
-
Page 2: Operation And Maintenance
‘dry’ for 1-2 minutes for this purpose. sure that the driving motor is not accidently switched Oil: Use only 8.1 ounces (0.24 litres) of Giant Oil (p/n 01154) ISO VG 220 GL4 (e.g. Aral Degol Make sure that all parts on the pressure side of the BG220) or SAE 90 GL4 gear oil. -
Page 3: Pump Specifications
Pump Specifications Max. Max. Nominal/ Nominal/ Max. Plunger Plunger Stroke Stroke Power Power Flow Flow Intermittent Intermittent Speed Diameter Diameter Req’d Req’d Pressure Pressure Model GPM l/min P230 2200 1750 0.71 0.13 P217 1.85 2200 1750 0.71 0.22 P230 2200 3450* 0.71 0.13... - Page 4 Exploded View - P200A-5100 Series...
- Page 5 P200A-5100 SERIES PARTS LIST ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY. 08300C Crankcase 08442 Wrist Pin 08301 Dipstick, Except P217-5100 1 08356 Oil Seal 08480 Dipstick, P217-5100 Only 08444A-0100 Seal Retainer, 316 S.S. 08302 Crankcase Cover 08443...
- Page 6 REPAIR INSTRUCTION - P200A-5100 SERIES CAUTION EPDM o-rings must not come into contact with mineral oil or mineral grease. Use silicone grease only. With a 22mm socket By inserting a small screw Using a needle nose wrench, remove the (3)
- Page 7 REPAIR INSTRUCTION - P200A-5100 SERIES Disassembly sequence of the back end of the P200A-5100 series pump. Before you begin, drain the oil from the crankcase. Remove the crankcase cover (3) and o-ring (4) from the crankcase (1). To remove the crankshaft (13), remove the bearing cover (7) and sight glass (8).
- Page 8 Liability under this warranty is on all non-wear parts and limited to the replacement or repair of those products returned freight prepaid to Giant Industries which are deemed to be defective due to workmanship or failure of material. A Returned Goods Authorization (R.G.A.) number and completed warranty evaluation form is required prior to the return to Giant Industries of all products under warranty consideration.